Author Topic: 1970 C10 what are these wires/plugs for?  (Read 2996 times)

0 Members and 1 Guest are viewing this topic.

Offline gordyzx9r

  • Turbo Street Eliminator
  • ******
  • Posts: 1068
  • PSI: 0
  • The Sultan of Swank
    • View Profile
1970 C10 what are these wires/plugs for?
« on: August 12 2024, 09:01:06 AM »
We're trying to put our 1970 C10 back together after having the body/paint done so we decided to tackle a lot of the wiring some mad scientist did before us.

Found this broken wire on the passenger side, with a plug that must have had a glass fuse in it that corroded and caused it to stick and break when I pulled it apart.

There is an identical one on the driver side.

Can't find it in the wiring diagram...any ideas what it's for?


Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: 1970 C10 what are these wires/plugs for?
« Reply #1 on: August 13 2024, 12:19:19 AM »
That looks familiar from my Camaro days but I can not bring it up in my memory bank.

Makes me wonder if it has been added on.  Does a meter show it is connected?  Thinking of reading resistance to on the non hot side to ground.
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: 1970 C10 what are these wires/plugs for?
« Reply #2 on: August 13 2024, 12:24:35 AM »
Also, check it for voltage to see what takes to get power going thru it.  Is one side hot with key off, on when the lights are on , radio on, etc.
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: 1970 C10 what are these wires/plugs for?
« Reply #3 on: August 13 2024, 02:55:06 AM »
Under hood lights?
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline ULYCYC

  • Turbo Street Modified
  • *****
  • Posts: 872
  • PSI: 4
    • View Profile
Re: 1970 C10 what are these wires/plugs for?
« Reply #4 on: August 13 2024, 07:12:12 AM »
This may help for that or future problems. I dont remember glass fuses on anything under the hood from the factory. I would say its a add-on to trigger a relay or single circuit since the wire gauge is so small

https://farm4.static.flickr.com/3645/3397411656_03c2a8064d_o.jpg
ED BAKER
87-T, Maplight equipped rear view mirror..
01 Park Ave Ultra S\'charged
BPG#1458

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal