| Location | Details | Torque |
| UCA | Shaft to frame nuts | 48 |
| UCA | Shaft to bushing nuts | 85 |
| UCA | Ball joint stud to steering knuckle nut | 52 |
| LCA | Ball joint stud to steering knuckle nut | 70 |
| LCA | Bushing to frame bolt and nut | 65 |
| Front Shock | Upper stud nut | 100 in*lb |
| Front Shock | Lower control arm bolts | 20 |
| Front Sway Bar | Link nut | 156 in*lb |
| Front Sway Bar | Bracket to frame bolts | 24 |
(Sorry about the formatting, copying it from a spreadsheet. More stuff below.)
upper control arm pivot shaft to frame nuts 48
upper control arm pivot shaft to bushing nuts 85
upper balljoint stud to steering knuckle nut 52
lower balljoint stud to steering knuckle nut 70
lower control arm bushing to frqame bolt and nut 65
front shock absorbwer upper satud nut 100in lbs]
front shock absorber to lower control arm bolts20
front stabilizer bar link nut 156 in lbs
front stabilizer bar bracket to frame bolts 24
control arm bolts and nuts up[per and lower 80
rear shock absorber to lower mount 65
rear shock absorber to upper mount 144 inlbs
rear stabilizer bar to lower control arm nut 37
steering wheel to steering shaft nut 30
outer tie rod end to steering knuckle nut 30
inner tie rod end to intermediate rod nut 40
tie rod adjuster sleeve clamp nut 15
steering gear to frame bolts 80
pitman arm to steering gear shaft nut 185
idler arm to intermediate rod nut 40
idler arm to frame nuts 60
intermediate shaft pinch bolts upper 46 lower30
wheel lug nuts 80 steel 100 aluminum-just thought I'd throw that in there.
