« previous next »
Pages: [1]   Go Down

Author Topic: Endoscope  (Read 3828 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Endoscope
« on: July 28 2018, 11:09:43 AM »
About a year ago, I bought an endoscope to use with my phone..it is an Depstech if you want to tell me how much better yours is  :068:

It works great and the only downside is that I have a usb-c port on my phone so it needs an adapter to plug in.  Very handy to see where I cannot see.

Recently, I could not find the adapter which chapped me off.  I bought another one..same brand...that works off wifi.  Now, this thing is great.  I can plug it into my battery storage pack for power, prop the phone up wherever I want and concentrate on aiming the probe.  I used it yesterday to look thru the valve cover bolt holes to be sure, I had the cover lined up right.

Eliminating the cable to the camera makes it much easier to take a pic or movies without losing aim of the probe.

I bet Earl has a bunch of these things for examining various orifices

Yeah, I found the adapter about 30 minutes after ordering a new one...of course, but, they are cheap and I like the new one
Logged
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: Endoscope
« Reply #1 on: July 28 2018, 03:04:21 PM »
Earl has a cell camera made by Caterpillar with FLIR on it.


I can see the good stuff in the dark...      AND  underwater if I want to!!  ;)
Logged
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline BoostedRPS

  • Bone Stock
  • **
  • Posts: 80
  • PSI: -1
  • Boost n00b
    • View Profile
Re: Endoscope
« Reply #2 on: July 28 2018, 09:36:12 PM »
Quote from: Steve Wood on July 28 2018, 11:09:43 AM
About a year ago, I bought an endoscope to use with my phone..it is an Depstech if you want to tell me how much better yours is  :068:

It works great and the only downside is that I have a usb-c port on my phone so it needs an adapter to plug in.  Very handy to see where I cannot see.

Recently, I could not find the adapter which chapped me off.  I bought another one..same brand...that works off wifi.  Now, this thing is great.  I can plug it into my battery storage pack for power, prop the phone up wherever I want and concentrate on aiming the probe.  I used it yesterday to look thru the valve cover bolt holes to be sure, I had the cover lined up right.

Eliminating the cable to the camera makes it much easier to take a pic or movies without losing aim of the probe.

I bet Earl has a bunch of these things for examining various orifices

Yeah, I found the adapter about 30 minutes after ordering a new one...of course, but, they are cheap and I like the new one


I need a new Endoscope that has a smaller "head" than what I currently have now. Between my Milwaukee scope, and this other wireless one, the camera on it has about a 1.5-2" solid stiff piece on it before it starts to be flexible.


I need something that has a smaller camera end on it, so that I can go around tighter turns and bends.


Is this the scope you're using currently?  https://www.amazon.com/dp/B077XWJP2T/ref=sspa_dk_detail_0?pd_rd_i=B0785H3XR7&pd_rd_wg=0sjwG&pd_rd_r=VD55PZMV4BBHC754GRW5&pd_rd_w=Yc44z&th=1
Logged

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Endoscope
« Reply #3 on: July 28 2018, 10:10:56 PM »
Wireless Endoscope, Depstech WiFi Borescope Inspection Camera 2.0 Megapixels HD Snake Camera for Android and IOS Smartphone, iPhone, Samsung, Tablet - Black(33FT) https://www.amazon.com/dp/B01MYTI2HV/ref=cm_sw_r_cp_apa_i_4esxBb134F354
Logged
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Re: Endoscope
« Reply #4 on: July 28 2018, 10:33:01 PM »
Damn it,  Steve.  Now I have to buy one and check it out.
« Last Edit: July 29 2018, 09:09:00 PM by Top Speed »
Logged
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Endoscope
« Reply #5 on: July 28 2018, 10:49:17 PM »
Quote from: Top Speed on July 28 2018, 10:33:01 PM
Damn, it  Steve.  Now I have to buy one and check it out.

LOL...it's really handy!
Logged
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Endoscope
« Reply #6 on: July 28 2018, 11:10:38 PM »

The one Tyler linked is the one I would buy today.  bigger battery and longer focal length.  I had not used mine for awhile so I plugged it into my back up pack...used that and charged the onboard battery
Logged
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline TurboCajun

  • Keith Theriot
  • Turbo Street Modified
  • *****
  • Posts: 324
  • PSI: 1
  • 6 Packed
    • View Profile
Re: Endoscope
« Reply #7 on: July 30 2018, 10:21:29 AM »
Logged
85 GN -- Converted to 87 set-up using 66/72 turbo, front mount I/C, 80lb injectors,gn1 heads 14 bolt 1.65 roller rockers stud mount, ported intake with plate, fuel hot wire, 3" dp, running 24psi., alky kit, stroker 20 over, 212/206 roller,  best time 10.995 @ 121 1.56 60ft
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.7 © 2008-2024, SimplePortal