Dieing In High Gear-Opinions Wanted

[Scoobum]

Scott, I'll give you a call around 4pm. Stay safe.

[Scoobum]

Quietest fuel pump I've ever heard...don't like it. The other sounded like a pump from a 747. The FP was 4 lbs higher with the new pump. I had to dial it down. I swapped in a new fuel filter as well.

[626gn]

Scott, I'll give you a call around 4pm. Stay safe.

Nice talking to you today. When you're ready let me know and I'll get a module shipped out to you. I just sent a fuel pump to someone in Edmonton, Alberta. First class mail was $15 or so (no insurance or tracking) but it takes a really long time to get there... I will think twice before complaining about shipping costs to Hawaii again. Canadians have us beat!

[Scoobum]

Oahu...ya' got it made! Let's see what happens with the pump this Friday.

[Scoobum]

Back to the track tomorrow to try the new fuel pump. Going back to the same ignition module. I have 2 others to try...but Steve thinks they're for an NA engine. Gonna try them anyway if the pump isn't the solution. God hates a coward.


Don with the stock TR that ran the low 13 texted me today and asked if the track was open tomorrow. Wondering if he wants to try his ET Streets...

[good2win22]

Wishing you some better luck this weekend!  Let us know how it goes

[nocooler]

You don't test before you get to the track?

[Scoobum]

Jeremy...you can't. If you get caught doing anything over 30 mph it's 'racing'. 5 grand fine...car impounded...li cence suspended...in surance is so high you can no longer afford to drive.

[nocooler]

   - I've been pulled over testing with the T-type and the cop just wanted to know what the whistle was 

[Scoobum]

1st pass-Left from an idle and waited till it went into 3rd gear...then flat footed it. Revved clean in 3rd gear.


2nd pass-Left from an idle and waited till it went into 2nd gear...then flat footed it through 2nd and 3rd. Revved clean in 2nd and 3rd.


3rd pass-Brought the revs up to 1500 and jumped on it. Made a clean pass through the 1/8th mile. On 17 PSI with Erics chip on the default settings it went 8.40 at 84 through the 1/8th...and coasted from the 1/8th to a 13.8 at 76. High and low gear 02's were in the 850's. I used the other Delco module...seems to work fine.


Thanks for everyones help...always appreciative.

[Steve Wood]

glad it looks like it is working...put some more pressure in the cylinders and see if it keeps it up

[Scoobum]

Gonna bump it to 22 and dial in the low gear tune.

[Scoobum]

Damn those new Mustangs are slow. On my 3rd pass a new Mustang got up beside me. I let it out of it at the 1/8th and coasted to a 13.8. He was still 4 to 6 lengths behind. If I were him I'd be going to the dealer in the morning and asking for my money back.

[Steve Wood]

LOL...I bet he was pissed!

[Be4u]

Thanks for everyones help...always appreciative.

No problem! I'm always willin' to help.