Author Topic: How Fast Would It Go?  (Read 15171 times)

0 Members and 4 Guests are viewing this topic.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
How Fast Would It Go?
« on: December 15 2015, 11:15:49 PM »
I have my eye on a bone stock driver quality TType. How fast would it go with the following mods at 25 PSI on a 1.7X launch.

RJC Power Plate
60 LB Injectors and matching 110 TT race chip
44/49 with a .83 or .85 Precision exhaust housing
Off the shelf 2800 PTC NL convertor
LT1 MAF with Translator/CAI
AFPR
Right Rear air bag
Dutt neck welded to a stock SLIC
981 valve springs
Steve Monroe ported exhaust elbow
Hollowed out cat
255 LPH fuel pump and hotwire kit
Boost, KR and SM...and tuned with PL and NB


Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline good2win22

  • Turbo Street Outlaw
  • *******
  • Posts: 2019
  • PSI: 0
  • No man lives happily lest he remove the boredom
    • View Profile
Re: How Fast Would It Go?
« Reply #1 on: December 16 2015, 05:58:38 AM »
Just guessing here... Mid to high 11's
Jason

1966 Ford Ranch Wagon
1982 Jeep Wagoneer Limited
1986 Grand National BLK PHNX
1987 Turbo Regal Limited
2018 Ram 2500 Cummins

Offline motorhead

  • Turbo Street Outlaw
  • *******
  • Posts: 2267
  • PSI: 4
  • look at my balls... look at them!!!
    • View Profile
Re: How Fast Would It Go?
« Reply #2 on: December 16 2015, 07:28:29 AM »
1.7 60 foot means you plan for good tires.  So yeah, somewhere in the 11s.  I'd do a 3000 stall with a clutch and lock it on the big end for more mph.
>>>Das Instagram<<<
'80 LeMans Wagon|'87 Monte Carlo SS|'92 Camaro Z28|'07 TrailBlazer SS|'15 Colorado Z71|'19 Hellcat Widebooty M6

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: How Fast Would It Go?
« Reply #3 on: December 16 2015, 10:22:37 AM »
11.85
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6517
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Re: How Fast Would It Go?
« Reply #4 on: December 16 2015, 03:15:06 PM »
So you just looked at all the stuff sitting on your shelf and made a list?
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

Offline TexasT

  • Legend in my own mind
  • Turbo Street Outlaw
  • *******
  • Posts: 2171
  • PSI: 1
  • So, This black car is fast?
    • View Profile
Re: How Fast Would It Go?
« Reply #5 on: December 16 2015, 03:23:17 PM »
At first i thought 11.7-8 but with only 25 psi I'm going to say 12 ohs . If you can get the 60 ft into the 1.50 range then I can see it in the 11s and more boost will also get you there. Gotta have it tuned well and a decent driver too.
Rich

"Goals without actions are just dreams."

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: How Fast Would It Go?
« Reply #6 on: December 16 2015, 05:14:06 PM »
So you just looked at all the stuff sitting on your shelf and made a list?

With the exchange rate...this is gonna be on an extreme budget. The fuel pump and hotwire kit will be new...the rest...used. Rich...with the stock heads I don't think it would do much above 25 PSI. The 2800 convertor and the 44/49 with the big exhaust housing should be a perfect match...with low gear fuel/timing dialed in. Mike, if I were to go LU...it'd be a Precision  2800 multidisc...ot herwise an off the shelf 2800 PTC NL. I saw Brandon on Sunday...and he's a tuning wizard...but stays quiet. He went 11.01 at 123 with a 6131 on 21 PSI...pump gas...and a 1.73 launch...with a 2800 PTC NL convertor. Slip was minimal.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline gusszgs

  • Turbo Street Modified
  • *****
  • Posts: 431
  • PSI: 1
  • Limited quick brick
    • View Profile
Re: How Fast Would It Go?
« Reply #7 on: December 16 2015, 07:12:13 PM »
Well Brad, my combo is pretty much what your talking. Little larger turbo with the TE60. I'm thinking I'll break into the high 11's with a better 60' next year.
Jim
1987 T Limited

Offline Forzfed

  • Turbo Street Eliminator
  • ******
  • Posts: 1341
  • PSI: 5
  • Boost n00b
    • View Profile
Re: How Fast Would It Go?
« Reply #8 on: December 16 2015, 07:23:45 PM »

With the exchange rate...this is gonna be on an extreme budget.

The exchange rate makes baby Jesus cry and many others!

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: How Fast Would It Go?
« Reply #9 on: December 16 2015, 07:42:20 PM »
Well Brad, my combo is pretty much what your talking. Little larger turbo with the TE60. I'm thinking I'll break into the high 11's with a better 60' next year.

5 hours of open practice April 15th at SMP! :)
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
How Fast Would It Go?
« Reply #10 on: December 16 2015, 08:36:48 PM »
I am guessing with stock heads, sweet spot will be 28 psi.

Sent from my LG-H810 using Tapatalk

Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline gusszgs

  • Turbo Street Modified
  • *****
  • Posts: 431
  • PSI: 1
  • Limited quick brick
    • View Profile
Re: How Fast Would It Go?
« Reply #11 on: December 16 2015, 08:45:20 PM »
I am guessing with stock heads, sweet spot will be 28 psi.

Sent from my LG-H810 using Tapatalk


That's music to my ears. My 12.1 was at 24psi.......so a little room left yet
Jim
1987 T Limited

Offline motorhead

  • Turbo Street Outlaw
  • *******
  • Posts: 2267
  • PSI: 4
  • look at my balls... look at them!!!
    • View Profile
Re: How Fast Would It Go?
« Reply #12 on: December 16 2015, 09:12:39 PM »
Seems my shit should be running 10s. http://www.turbobuick.com/forums/threads/te63-turbo-for-sale.435019/

Slowest. Car. Ever.
>>>Das Instagram<<<
'80 LeMans Wagon|'87 Monte Carlo SS|'92 Camaro Z28|'07 TrailBlazer SS|'15 Colorado Z71|'19 Hellcat Widebooty M6

Offline TexasT

  • Legend in my own mind
  • Turbo Street Outlaw
  • *******
  • Posts: 2171
  • PSI: 1
  • So, This black car is fast?
    • View Profile
Re: How Fast Would It Go?
« Reply #13 on: December 16 2015, 10:24:41 PM »
He runs tens but his name was forgotten? Yeah, I'm going with the ocean front property in Arizona.The things people post on internet boards.
Rich

"Goals without actions are just dreams."

Offline Forzfed

  • Turbo Street Eliminator
  • ******
  • Posts: 1341
  • PSI: 5
  • Boost n00b
    • View Profile
Re: How Fast Would It Go?
« Reply #14 on: December 16 2015, 10:39:08 PM »
Seems my shit should be running 10s. http://www.turbobuick.com/forums/threads/te63-turbo-for-sale.435019/

Slowest. Car. Ever.

Everyone says my car is slow too, but it does have a race weight of over 4000lbs so I know it is making power.

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal