Got the tranny and transfer case back from a local shop on Monday evening. Transfer case had a couple of bad bearings. Tranny was just freshened with some new clutches, new seals and a new converter. Got the tranny stabbed Monday evening and the transfer case and all the miscellaneous crap put back in on Tuesday evening. This evening I got all the fluids topped off and double checked my install. Thru the axles up on jacks and ran thru all the gears. Locked the front hubs and checked the transfer case through its ranges. Pulled the stands and went out on the road. Road test complete with no issues so far (knock on wood). I need to adjust the parking brake and recheck the fluid after eating some dinner. Also need to adjust the tv linkage a bit. It's shifting a bit early on the 2-3 shift.