Author Topic: Rear Pinion Yoke Question  (Read 2170 times)

0 Members and 1 Guest are viewing this topic.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Rear Pinion Yoke Question
« on: July 29 2014, 06:25:35 PM »
What rear pinion yoke comes stock in these cars? I'm getting a measurement of 1.75" on the bolt centers for the strap...and an approximate size of 1.13" for the cup...but that's with the cup in the yoke. Was gonna order a girdle to replace the straps while I'm swapping out the axles.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline PacecarTA

  • Turbo Street Limited
  • ***
  • Posts: 172
  • PSI: 2
  • im not a newbie
    • View Profile
Re: Rear Pinion Yoke Question
« Reply #1 on: July 29 2014, 08:18:59 PM »
the ujoints are 3r
go to dennysdrivesha ft.com  and they have the specs on the joints
Paul   Magnabuick.com ..NJ rep
86GN pump gas 93/alky 109, iron heads, stock mains, no girdle  9.72 @139
best 1/8 6.13 @ 112 ,best mph 144
https://www.youtube.com/watch?v=vSKzv7ej7Cc
87 GN TTop 109 ,93/alky , 9.82 @ 139 20.6psi , best 1/8th 6.18@113.2
87 GnX'd 
87 GN TTop..stock as can b

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Rear Pinion Yoke Question
« Reply #2 on: July 29 2014, 08:57:12 PM »
Thanks Paul.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal