serious brake problem !!!!

[we4turbobuick]

i was checking my brake system out because my pedal was feeling spongey. so I took out the master cylinder and brake booster. and found out that the brake booster I was broke around the plastic tip where the rod that goes to the brake pedal. when they converted to back in brakes I don't think that they changed the pedal and it broke it because the pedal and booster rod wasnt lined up right. so i need a pedal what cars can i get one from? this is one of the many issues im having!!!   

[SuperSix]

i was checking my brake system out because my pedal was feeling spongey. so I took out the master cylinder and brake booster. and found out that the brake booster I was broke around the plastic tip where the rod that goes to the brake pedal. when they converted to back in brakes I don't think that they changed the pedal and it broke it because the pedal and booster rod wasnt lined up right. so i need a pedal what cars can i get one from? this is one of the many issues im having!!!   

Any RWD GBody, and there's a thread somewhere, I think you can reposition the pin.

[we4turbobuick]

this is the pedal I took off with the vacuum setup......

[SuperSix]

http://www.ihadav8.com/forum/index.php?topic=4054

[we4turbobuick]

thanks for the info its getting prepped very soon !!!!!

[we4turbobuick]

I just got my brake pedal fixed by relocating the pin for the booster. Im haveing problems putting the one nut on the bolt that holds the brake pedal. Its a tight fit in there...... i might have to drop the steering column!! Is there a guide somewhere on the net that can show me how to drop the steering column down so I could make it easier to put the bolt on. Thanks

[Steve Wood]

two nuts to remove to drop the column down...

[SuperSix]

two nuts to remove to drop the column down...

You and who else?














 

[Steve Wood]

you're not coming over?

[SuperSix]

Haha..

Wait...