terminal box

[SuperSix]

I need one for the Challenger as well....since I built a new instrument panel, I would like to wire it to something more substantial that the rotten, burned, rat chewed, repaired wiring that comprises the current dash harness.

On the buicks, I think I will mount it on the hvac box near the PL block so I can reach thru the glove box and change something without having to remove the under dash panel and try to find my way thru the maze of wiring.

Great idea!

[tb3]

should be easy to find what you need in the high end auto stereo/speaker world

[Steve Wood]

should be easy to find what you need in the high end auto stereo/speaker world

They would probably want a credit check before talking to me

[SuperSix]

Shady-ass Texan.   

[tb3]

time to barter!
its only a matter of time, anyways

[Steve Wood]

I ordered two from McMaster Carr last night

[Just a Six?]

I have the Buss Box Dave posted with 10 slots (5 per side) mounted on the back of my glovebox. Open it up (empty it) & hit the side rod & it's all sitting right there labeled.
I bet I removed 10 feet of garbage wire & now it's clean & easy to access.
Looks like this one & all 10 fuses are being used. Stock box is stock with no added jungle! 
http://www.wiringproducts.com/contents/en-us/d136_fuse_block_fuse_panel.html?gclid=CMu7ptvFwLICFdEWMgoddzIAyg

[Steve Wood]

Must be cold, oxygen ladened air that makes you guys so much smarter than me! 

[SuperSix]

I have the Buss Box Dave posted with 10 slots (5 per side) mounted on the back of my glovebox. Open it up (empty it) & hit the side rod & it's all sitting right there labeled.
I bet I removed 10 feet of garbage wire & now it's clean & easy to access.
Looks like this one & all 10 fuses are being used. Stock box is stock with no added jungle! 
http://www.wiringproducts.com/contents/en-us/d136_fuse_block_fuse_panel.html?gclid=CMu7ptvFwLICFdEWMgoddzIAyg

can you take a nice pic of it installed and wired for us? Pretty please?

[Just a Six?]

No problem do it tomorrow am. I posted pics a few years back on the other site but have no idea what thread??? Works very well! The labeling needs a professional look instead of just my scribbles. I also tagged each wire about 1 foot back with tape to make a 2nd label.

[Just a Six?]

Must be cold, oxygen ladened air that makes you guys so much smarter than me! 

More like Boring Winters that drive me to do projects that I would otherwise never finish. As I get older i really don't like the Cold! Amazing as Kids growing up in Winterpeg we would skate & play hockey (what else EH?) for hours in -30* with 25 mph winds until our toes were so Frozen & Purple you could barely walk!!   

[daveismissing]

I have the Buss Box Dave posted with 10 slots (5 per side) mounted on the back of my glovebox. Open it up (empty it) & hit the side rod & it's all sitting right there labeled.
I bet I removed 10 feet of garbage wire & now it's clean & easy to access.
Looks like this one & all 10 fuses are being used. Stock box is stock with no added jungle! 
http://www.wiringproducts.com/contents/en-us/d136_fuse_block_fuse_panel.html?gclid=CMu7ptvFwLICFdEWMgoddzIAyg

The question is: How many times have you forgotten to empty it first?   

[Steve Wood]

He has some one come in and take care of that weekly

[Just a Six?]

Shot these at 7am & didn't spend time cleaning it up from last time I was back there so altho messy it works well. I use Industrial Strength Velco & it's stayed for over 3-4 years.
It could use better labels but I can read them.
I bought it off Tim years ago & just figured it's easy access. 
PL hookup is right beside it.
Pos & Neg are direct to the engine.
I just counted only 8 fuses not 10.
You can see the Alky Control box in the back corner as well.
PS: The screwdriver is the same one the Guys found under my hood at Timmies 3 weeks ago!!

[Steve Wood]

That certainly makes for an easy access and a drop down panel to boot!  I like it, David!