Author Topic: Bore Size...How Far? (Read 3064 times)

Scoobum · « **on:** November 25 2011, 12:35:19 PM »

How far can you bore one of these 109's out too? What would be the minumum wall thickness you could go to...to handle say...24PSI? Just curious.

Charlief1 · « **Reply #1 on:** November 25 2011, 02:40:03 PM »

I know a few guys have gone .060 but the block was sonic tested first. Generally you shouldn't go over .040 to keep the cylinder walls stable.

Steve Wood · « **Reply #2 on:** November 25 2011, 05:11:54 PM »

sounds right to me

Scoobum · « **Reply #3 on:** November 25 2011, 11:29:16 PM »

I know a few guys have gone .060 but the block was sonic tested first. Generally you shouldn't go over .040 to keep the cylinder walls stable.

Therein lies my question. What's the minumum thickness of the cylinder walls I can get away with? Getting a block sonic checked isn't an issue.

Charlief1 · « **Reply #4 on:** November 25 2011, 11:37:12 PM »

What size is the block now?

Scoobum · « **Reply #5 on:** November 26 2011, 12:11:07 AM »

I have one that's .030...but is sleeved. Scored up from a piston pin getting loose.

IHADAV8.com - Turbo Buick Tech, and Nonsense