Author Topic: Torque Converter?? (Read 4763 times)

melrob94 · « **on:** April 14 2011, 04:37:47 PM »

I took the car out last evening and I noticed a whine coming from the transmission, only in gear and progresses with rpm. I brake torqued the car and it wouldnt do a burnout, but as soon as I let off the brake the car took off and lit up the tires. It would build boost on the brake but wouldnt break the tires loose. It is a stock D5 converter and a 200r4. Any help would be appreciated.

Rob.

melrob94 · « **Reply #1 on:** April 14 2011, 08:20:51 PM »

I brake torqued it in the driveway and it would only build about 3lbs of boost and I could hold the throttle to the floor and that is all it would do and the rpm's wouldn't go above 2600. Driving i can kick it and boost 23lbs.

melrob94 · « **Reply #2 on:** April 14 2011, 10:16:13 PM »

I think I figured it out. after putting the te44 on with Precision .63 the stock converter wont allow the turbo to spool up. thanks for all the input though.

SuperSix · « **Reply #3 on:** April 15 2011, 08:10:19 AM »

Asked and answered.

Steve Wood · « **Reply #4 on:** April 27 2011, 12:12:25 AM »

if you have a programmable chip...take a little fuel out of low and add some more timing

IHADAV8.com - Turbo Buick Tech, and Nonsense

News:

Author Topic: Torque Converter?? (Read 4763 times)

melrob94

Torque Converter??

melrob94

Re: Torque Converter??

melrob94

Re: Torque Converter??

SuperSix

Torque Converter??

Steve Wood

Torque Converter??