Author Topic: Body and Painting  (Read 17035 times)

0 Members and 1 Guest are viewing this topic.

Offline Turbodave

  • Bone Stock
  • **
  • Posts: 89
  • PSI: 0
    • View Profile
Re: Body and Painting
« Reply #30 on: April 05 2012, 02:33:28 PM »
as some of you know I have been in this business for over 25 years... I will offer advice as needed or requested...at least I could be good for something here...

How many hours to re-paint a GN? I know many variables here but to narrow it down for an educated guess, not a national show quality job, but a good solid job. NO body work just R & R, strip original paint and repaint? I've gotten a couple estimates both around $8,000. They say $1500 in materials, and 90 hours of labor. 90 hours? ???

 
Where are you located?  If you're anywhere near NC, I know somebody that can give you a primo job, for a lot less $$$
That's where mine is getting done now... Yes it takes time!!! Mine's been there just over a month and is going into the booth this week.
TurboDave EWCS(SW) USN (Ret.)
Sevierville, TN
Translator Pro;  MAFless fuel, spark, boost and fuel pump management

86 GN(Translator Pro/Extender Pro/w Boost control, PLX WBO2 (original owner)

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1248
  • PSI: 2
    • View Profile
Re: Body and Painting
« Reply #31 on: April 10 2012, 02:21:41 PM »
I'm in northern WI. :( I'm in negotiations with an old classmate now who is in the business
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline TURBOPOWERED68

  • David
  • Turbo Street Modified
  • *****
  • Posts: 488
  • PSI: 1
    • View Profile
Re: Body and Painting
« Reply #32 on: April 10 2012, 09:27:32 PM »
as some of you know I have been in this business for over 25 years... I will offer advice as needed or requested...at least I could be good for something here...

i am planning on painting my hood, trunk and bumpers (plastic Bumpers).
i will be stripping it down to bare metal
the car is a daily driver and sits out side all year long.
Once the car is in bare metal,
What would a list of materials look like from beginning to end?
     

in hoping ???
Most talk about having thick skin but thats just BS.
This damn attitude of "you didn't listen to us/me now you should burn in hell for it" really sucks.

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal