Author Topic: XFI Back To Stock ECM-Help Needed  (Read 4249 times)

0 Members and 2 Guests are viewing this topic.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
XFI Back To Stock ECM-Help Needed
« on: January 01 2020, 08:00:09 PM »

I'm fairly certain I'm gonna be returning an XFI car back to a stock ECM. I'm tired of locals who don't their asses from holes in the ground about these cars telling others they need cool guy parts when their own cars are turds and are so fukn slow they can't get outta their own way. Rant over.


Okay, I assume XFI is spliced into the ECM harness. Can I remove the XFI wiring and reattach the ECM wires together. TIA.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Just a Six?

  • OK Now who Farted??
  • Turbo Street Eliminator
  • ******
  • Posts: 1253
  • PSI: 2
    • View Profile
Re: XFI Back To Stock ECM-Help Needed
« Reply #1 on: January 01 2020, 08:22:25 PM »

Brad last year I pulled apart my Gen 2 system to install the Axis under the hood & out of all the wires only 1 was snipped & hardwired into the harness the rest were just the wire taps which I removed & taped up for safety. I Assume the XFI is probably a mix of both so they should be the same I would think?
 :cheers: Happy New Year!  :cheers:
David
87 LTD. Purchased May 88
Doeskin leather, coach lites without Landau Roof, moon roof, carpeted trunk & No Factory Hood Ornament!
The sticker on AC shows a V-8 Carb car. Special order by Mr. Nick Hall VP of GM Canada
Runs 11.50 on 21 lbs with my old style 67 Q Trim & Alchy

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: XFI Back To Stock ECM-Help Needed
« Reply #2 on: January 01 2020, 08:24:49 PM »
Thanks Dave. The wires are colour coded...so at worst...I'll have to solder a few together. I think. I'll find out soon enuf.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: XFI Back To Stock ECM-Help Needed
« Reply #3 on: January 01 2020, 08:46:45 PM »
Sounds right to me
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline nocooler

  • Administrator
  • Turbo Street Eliminator
  • ******
  • Posts: 1836
  • PSI: 3
    • View Profile
Re: XFI Back To Stock ECM-Help Needed
« Reply #4 on: January 02 2020, 10:26:22 AM »
If you are lucky it has an adapter harness. 
IhaveaV8

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: XFI Back To Stock ECM-Help Needed
« Reply #5 on: January 02 2020, 11:14:45 AM »
That'd make life easy...thanks.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline john robertson

  • Bone Stock
  • **
  • Posts: 65
  • PSI: 0
  • I'M INCOGNITO
    • View Profile
Re: XFI Back To Stock ECM-Help Needed
« Reply #6 on: February 03 2020, 06:09:14 PM »
Well, what happened? I might be acquiring a GN with one of those aftermarket computer systems. The owner complains he can't grasp tuning it himself and he has to get Hartline to tune it. Hence, he never drives his car. If I buy it, the first thing I'm going to do is rip all that shit out. How'd YOU make out?
86 EL CAMINO w/ GN drivetrain - NICE!  86 T-TYPE - NICER!  87 GN -- NICEST!

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: XFI Back To Stock ECM-Help Needed
« Reply #7 on: February 03 2020, 07:41:37 PM »
He decided he wants the car to remain a turd.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Grumpy

  • Turbo Street Modified
  • *****
  • Posts: 498
  • PSI: 4
    • View Profile
Re: XFI Back To Stock ECM-Help Needed
« Reply #8 on: February 03 2020, 07:45:30 PM »
you can leed a horse to water but ya can't make em drink  :rofl: Years ago I stripped a loaded to the gills race car. Ran 11.99 once. Made good $$$ piecing it out. :player: Turbo Tweak rules till your FLYING !

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: XFI Back To Stock ECM-Help Needed
« Reply #9 on: February 04 2020, 01:49:56 PM »

Most have it stuck in their heads that an aftermarket fuel management system like XFI will turn their TR into a hell ride. When asked about a fuel management system, I  tell the person to pick something they understand so that they don't have to rely on someone else to set it up and tune it for them. One of the young locals is a wizard with XFI etc, so I fully understand and endorse him using it. Grumpy/Russ went 9.98 at 138 years ago on Erics alky chip. I ran 7 flat at 100 in the 1/8th all day long with Erics 112 race chip on stock junk, 23 PSI, 780/780 for fueling, 36/24 for timing and an easy 1.68 launch. I pulled into the lights last, spooled for 2 seconds and was gone on a quick light. Vids are on my channel. For whatever reason, TR owners love to struggle.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal