Author Topic: Timing Cover (Read 3103 times)

TWild · « **on:** May 10 2018, 08:57:18 PM »

OK,

I just installed a new cam and lifters. While I had the front cover off, I did the earlbrown mods. My question is, can the front cover be installed with the cam sensor already inserted into it (with the engine set up at 25 ATDC)? Ya never know till you ask

TW

TexasT · « **Reply #1 on:** May 11 2018, 06:59:43 AM »

I don't think the gears would mesh up with the cam but I guess you could try. I wouldn't do it that way.

Steve Wood · « **Reply #2 on:** May 11 2018, 07:38:25 AM »

might end up cracking the cover and never get a mesh plus the odds against being installed correctly would be about one in six

TWild · « **Reply #3 on:** May 11 2018, 08:56:57 AM »

Thanks Guys,

This is my first time pulling and reinstalling the front cover. I'll just install the cam sensor once the cover is on.

TW

earlbrown · « **Reply #4 on:** May 11 2018, 06:35:06 PM »

You can, but it won't be set right.

IHADAV8.com - Turbo Buick Tech, and Nonsense

News:

Author Topic: Timing Cover (Read 3103 times)

TWild

Timing Cover

TexasT

Re: Timing Cover

Steve Wood

Re: Timing Cover

TWild

Re: Timing Cover

earlbrown

Re: Timing Cover