« previous next »
Pages: 1 [2]   Go Down

Author Topic: Turbo Blankets-Advantages?  (Read 7364 times)

0 Members and 1 Guest are viewing this topic.

Offline reality

  • Turbo Street Modified
  • *****
  • Posts: 546
  • PSI: 0
  • Boost n00b
    • View Profile
Re: Turbo Blankets-Advantages?
« Reply #15 on: June 21 2017, 08:39:51 PM »
COOL What is the criteria going to be?
Logged

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Turbo Blankets-Advantages?
« Reply #16 on: June 21 2017, 08:54:13 PM »
PL data has me leaving the line at 3000 in 3 seconds. Let's see what it does with the blanket on it.
Logged
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1248
  • PSI: 2
    • View Profile
Re: Turbo Blankets-Advantages?
« Reply #17 on: June 21 2017, 10:08:49 PM »
Great...someth ing else I will need :rofl:  looking forward to your results
Logged
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Turbo Blankets-Advantages?
« Reply #18 on: July 01 2017, 10:57:27 PM »
Found a post from Patrick Rubio...who's forgotten more about turbos than anyone will ever learn. He says if you can contain heat then it will help with spool up. Keep the blanket away from the feed and center section for air cooling.
Logged
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline reality

  • Turbo Street Modified
  • *****
  • Posts: 546
  • PSI: 0
  • Boost n00b
    • View Profile
Re: Turbo Blankets-Advantages?
« Reply #19 on: July 01 2017, 11:39:16 PM »
Logged

Offline reality

  • Turbo Street Modified
  • *****
  • Posts: 546
  • PSI: 0
  • Boost n00b
    • View Profile
Re: Turbo Blankets-Advantages?
« Reply #20 on: July 01 2017, 11:58:31 PM »
Something to consider



Turbo Blanket - Bad Idea?

Starting to read up on these. First red flag I see is one maker recommends not using it for a daily driver, saying when you park the car the blanket works so well retaining the heat that you start cooking the oil and such and as a result shorten the life of the turbo.

From the website.....
-------------------------
As these Blankets are designed to retain heat within the turbo, it is recommended that the blanket be removed for vehicle"Garaging" as retaining the heat without the water/oil circulation may cause long term reduced life for the turbo (this is particularly relevant when used with non-water cooled plain bearing units.
----------------------------

What do you experts think?

Reason I ask is that there is no doubt with the STS it spools quicker when warmed up. From my testing it's about a 400rpm difference. I can live with it but if there is something easy with no negative effects I can do to make it more consistent I would like to do it.

  Reply With Quote
Logged

Offline Be4u

  • Turbo Street Outlaw
  • *******
  • Posts: 3548
  • PSI: 0
    • View Profile
    • http://www.cardomain.com/memberpage/400586
Re: Turbo Blankets-Advantages?
« Reply #21 on: July 02 2017, 12:57:06 AM »
Soon, put it on right before the burn out, take it off after the run. Easy.
Logged
Save the bumper fillers!
Move to Canadia!

Offline aminga

  • Chicks Dig the Power Bulge
  • Turbo Street Limited
  • ***
  • Posts: 151
  • PSI: 0
  • Chicks Dig the Power Bulge
    • View Profile
Re: Turbo Blankets-Advantages?
« Reply #22 on: July 02 2017, 09:06:10 PM »
The real goal is to retain the heat in the exhaust stream.  To do that you need to coat the inside of the housing. 
Logged
86 Regal T-type. One Owner. Twisted 6 Racing Built 109, FTSS Revolution X 206/210 Cam, T&D 1.65 Rockers, Diamond Forged Pistons, RJC Power Plate, TA6262DBB, PTE SLIC, Alkycontrol pump and Kit and ISAC Controller, Bailey TR6 Wastespark, TA Headers, ATR Downpipe, Racetronix Walbro pump and hot wire ki

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Turbo Blankets-Advantages?
« Reply #23 on: September 08 2017, 02:57:29 PM »
Installed. I'll have before and after data in a week or two.
Logged
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Grumpy

  • Turbo Street Modified
  • *****
  • Posts: 498
  • PSI: 4
    • View Profile
Re: Turbo Blankets-Advantages?
« Reply #24 on: September 18 2017, 05:11:15 PM »
Does hold the heat. We have one  :rolleyes; BUT I was told she needed it by Russ. Melissa brings up the boost to 1 or 2#s then bumps the first light. We have a new class at the drags here where it's an instant green. Bumps the 2nd light an she is ready to go !!
Logged
Pages: 1 [2]   Go Up
« previous next »
 
SimplePortal 2.3.7 © 2008-2024, SimplePortal