Author Topic: Erratic TPS Reading And Running Like Crap  (Read 4720 times)

0 Members and 1 Guest are viewing this topic.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Erratic TPS Reading And Running Like Crap
« on: April 03 2015, 05:47:20 PM »
Got a call from Dan today and his car is running like crap...and the TPS via SM is erratic. Bad TPS?
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #1 on: April 03 2015, 07:21:49 PM »
or wiring between the TPS and ECM.  Odds are it's the TPS.
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #2 on: April 03 2015, 07:38:04 PM »
Thanks Earl. Doing a Caspers order. Gonna get John to toss one in with the rest of the stuff.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #3 on: April 03 2015, 08:28:34 PM »
It's always good to have a spare, but I'd back probe the one installed just to see.
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #4 on: April 04 2015, 10:10:53 AM »
Question. Dan picked up a modded ECM to run his old skool 83's. Is it possible that ECM is causing the issue? I have a known good ECM here I can try.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Erratic TPS Reading And Running Like Crap
« Reply #5 on: April 04 2015, 11:44:59 AM »
It can be......I have seen it do it once....you can also put a meter on the tps and see if it is giving you the same numbers as the scan tool
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #6 on: April 04 2015, 12:48:57 PM »
It can be......I have seen it do it once....you can also put a meter on the tps and see if it is giving you the same numbers as the scan tool

We both know I'm useless at electrical. :)  I'm assuming you want me to probe the ends of each of the three wires...and the value should stay steady.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline TexasT

  • Legend in my own mind
  • Turbo Street Outlaw
  • *******
  • Posts: 2171
  • PSI: 1
  • So, This black car is fast?
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #7 on: April 04 2015, 01:42:40 PM »
I believe the value should move as you open the throttle plate(the tps moves)
I think at rest it might be like .42v and at wot 4.5 or so and should move steadily as you open and close the throttle. If it jumps there might be a dead spot on the tps. I think you can read it on a scan tool also.
Rich

"Goals without actions are just dreams."

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #8 on: April 04 2015, 02:05:14 PM »
I believe the value should move as you open the throttle plate(the tps moves)
I think at rest it might be like .42v and at wot 4.5 or so and should move steadily as you open and close the throttle. If it jumps there might be a dead spot on the tps. I think you can read it on a scan tool also.

Dan said with key on...the TPS value on the SM is jumping all over the place. It won't stay still. If you watch the TPS on PL you SHOULD see it move smoothly as you move the throttle. I'm gonna take my PL to Dans tomorrow and hook it up to this ECM I have. Figures the one spare part I don't have is a known good TPS.
« Last Edit: April 04 2015, 02:11:09 PM by Scoobum »
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6517
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #9 on: April 04 2015, 04:49:08 PM »
Take a voltmeter and look at the wire that carries the 5v supply to the TPS -is that steady?
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #10 on: April 04 2015, 04:52:12 PM »
Take a voltmeter and look at the wire that carries the 5v supply to the TPS -is that steady?

Will check tomorrow. Which is the 5 volt wire?
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6517
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #11 on: April 04 2015, 05:10:23 PM »
When  you do what Steve asked you will have figured out the TPS and GND wires
So its the one left over...
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Erratic TPS Reading And Running Like Crap
« Reply #12 on: April 04 2015, 06:06:37 PM »
The dark blue wire is the signal wire :)

5.0v wire is the gray one
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #13 on: April 04 2015, 06:21:46 PM »
Thanks Steve. I'll get at it in the morning. Gonna freeze my ass off in the 32F temps tomorrow.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Re: Erratic TPS Reading And Running Like Crap
« Reply #14 on: April 12 2015, 04:16:11 PM »
Swapping in a known good ECM cured the issue. Thanks for the help guys.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal