Author Topic: Learn From My Stupidity  (Read 2695 times)

0 Members and 1 Guest are viewing this topic.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5599
  • PSI: 3
  • RED-RETIRED EXTREMELY DANGEROUS
    • View Profile
Learn From My Stupidity
« on: July 06 2013, 10:47:34 AM »
While my friend was taking a calm down pill from doing a moonshot with his Hayabusa, I pulled some more low gear fuel from my GN and then took it down the strip for a PL run, Hazed the DR's the length of the grandstand and it pulled like a freight train when it hooked up. All was well till the three quarter track mark...and then it fell on its face...felt like it went into neutral. Turned the corner and it was down a couple of cylinders. SM said no KR and 756 for 02's. WTF?! Got back to the trailer. No smoke...no steam...normal oil level...felt around an couldn't feel anything around the heads to indicate the headgasket(s) had blown out. Pulled the coil/module off and separated them. One of the coil tabs had broken off...lost 2 cylinders. I know why. I installed a new coil pack about a year ago...and you have to bend the tabs down...and you can only do it once. I remember pushing on one of the wires...and the tab came back up maybe 30 degrees...and I gently bent it back down. Prolly best to push the wire on and then bend the tab down. Installed a spare coil pack and made an 1/8th mile blast...all went well. Lesson learned.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9950
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Learn From My Stupidity
« Reply #1 on: July 06 2013, 02:08:44 PM »
first I have heard of that one, but, I can see how it can happen...glad it was not hurt
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Bob-Lob-Law

  • Bone Stock
  • **
  • Posts: 80
  • PSI: 0
    • View Profile
Re: Learn From My Stupidity
« Reply #2 on: July 06 2013, 05:22:56 PM »
That could have happened to anyone.  Thanks for sharing the info.

Offline smokin-6

  • 87 T
  • Bone Stock
  • **
  • Posts: 38
  • PSI: 0
    • View Profile
Re: Learn From My Stupidity
« Reply #3 on: July 07 2013, 09:49:36 AM »
Glad you didn't blow a head gasket.
87 T Ported stock heads, 212/212 roller, stock block, ALKY, CAS V4, 6262, 3.5 MAF & Translator, new tranny w/ 9-11
Original owner

Offline SuperSix

  • Administrator
  • Turbo Street Outlaw
  • *******
  • Posts: 5072
  • PSI: 234
    • View Profile
Re: Learn From My Stupidity
« Reply #4 on: July 07 2013, 12:49:53 PM »
Good info! Glad there was no motor damage.
'87 GN, 60lb, TA49, THDP, FTP cam, T+ lots o' shit - SOLD
'07 Ford F150 Lariat 2WD, 5.4L 3v - 255k
'20 Kubota BX2380. FEL, 60" deck
'78 IH/Case 184 Lo-Boy
'99 Kawasaki Bayou 400 4x4

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal