« previous next »
Pages: [1]   Go Down

Author Topic: Ahhh.. It feels good to work on the TR!  (Read 3337 times)

0 Members and 1 Guest are viewing this topic.

Offline SuperSix

  • Administrator
  • Turbo Street Outlaw
  • *******
  • Posts: 5072
  • PSI: 234
    • View Profile
Ahhh.. It feels good to work on the TR!
« on: October 14 2006, 11:20:39 PM »
After letting it sit for over 6 months since it got broken into..

I wrenched quote a bit today..

My stupid seat track (left side on driver's seat) broke in the front, it was weakened by rust. Both of the TR's I have owned have had this happen. I pulled the seat out, pulled off the offending track and fixed it.

I ground the metal clean, welded the broken piece to the track, and put a reinforcement plate on the bottom. Covered it with 2 coats of primer, and 2 coat of black paint - looks good!

Took the opportunity to spray liberal amounts of lithium grease on the tracks, thing slides back and forward with ease now.

I was eyeing the Turbobuicks.co m 200 amp alternator kit that's been rattling around in my trunk for over a year.. And decided to tackle that too. A couple hours later, that was done too.

I fired it up, looked at my volt gauge (Old 2 1/4 VDO out of a VW, pictured here: http://ihadav8.com/phpBB2/album_pic.php?pic_id=193 ), and it showed. 11v.
Logged
'87 GN, 60lb, TA49, THDP, FTP cam, T+ lots o' shit - SOLD
'07 Ford F150 Lariat 2WD, 5.4L 3v - 255k
'20 Kubota BX2380. FEL, 60" deck
'78 IH/Case 184 Lo-Boy
'99 Kawasaki Bayou 400 4x4

Offline Be4u

  • Turbo Street Outlaw
  • *******
  • Posts: 3548
  • PSI: 0
    • View Profile
    • http://www.cardomain.com/memberpage/400586
Ahhh.. It feels good to work on the TR!
« Reply #1 on: October 14 2006, 11:29:28 PM »
Bout time you did something to make you happy.

I got new tires and hooked up my wideband...fil led my alky
Logged
Save the bumper fillers!
Move to Canadia!

Offline SuperSix

  • Administrator
  • Turbo Street Outlaw
  • *******
  • Posts: 5072
  • PSI: 234
    • View Profile
Ahhh.. It feels good to work on the TR!
« Reply #2 on: October 14 2006, 11:33:36 PM »
Quote from: "Be4u @ Sat Oct 14, 2006 10:29 pm"
Bout time you did something to make you happy.

I got new tires and hooked up my wideband...fil led my alky


Oh! And I forgot - I installed the TPS Tech you gave me. Neat LEDs! :)

My TPS was set correctly...
Logged
'87 GN, 60lb, TA49, THDP, FTP cam, T+ lots o' shit - SOLD
'07 Ford F150 Lariat 2WD, 5.4L 3v - 255k
'20 Kubota BX2380. FEL, 60" deck
'78 IH/Case 184 Lo-Boy
'99 Kawasaki Bayou 400 4x4

Offline Recklessrob

  • Turbo Street Outlaw
  • *******
  • Posts: 5112
  • PSI: 3
    • View Profile
Re: Ahhh.. It feels good to work on the TR!
« Reply #3 on: October 15 2006, 12:01:50 AM »
I did a test fit with the crank in my block today. Mains are .0015". :supz:
No interference issues whatsoever.

I don't have a TPS tech, but I do have the volt booster.
The volt booster has worked well for me.
Logged
Rob

Offline SuperSix

  • Administrator
  • Turbo Street Outlaw
  • *******
  • Posts: 5072
  • PSI: 234
    • View Profile
Re: Ahhh.. It feels good to work on the TR!
« Reply #4 on: October 15 2006, 12:23:51 AM »
Quote from: "Recklessrob @ Sat Oct 14, 2006 11:01 pm"
I did a test fit with the crank in my block today. Mains are .0015". :supz:
No interference issues whatsoever.

I don't have a TPS tech, but I do have the volt booster.
The volt booster has worked well for me.
Logged
'87 GN, 60lb, TA49, THDP, FTP cam, T+ lots o' shit - SOLD
'07 Ford F150 Lariat 2WD, 5.4L 3v - 255k
'20 Kubota BX2380. FEL, 60" deck
'78 IH/Case 184 Lo-Boy
'99 Kawasaki Bayou 400 4x4

Offline Recklessrob

  • Turbo Street Outlaw
  • *******
  • Posts: 5112
  • PSI: 3
    • View Profile
Re: Ahhh.. It feels good to work on the TR!
« Reply #5 on: October 15 2006, 12:26:57 AM »
Quote from: "SuperSix @ Sat Oct 14, 2006 11:23 pm"
Quote from: "Recklessrob @ Sat Oct 14, 2006 11:01 pm"
I did a test fit with the crank in my block today. Mains are .0015". :supz:
No interference issues whatsoever.

I don't have a TPS tech, but I do have the volt booster.
The volt booster has worked well for me.
Logged
Rob

Offline SuperSix

  • Administrator
  • Turbo Street Outlaw
  • *******
  • Posts: 5072
  • PSI: 234
    • View Profile
Re: Ahhh.. It feels good to work on the TR!
« Reply #6 on: October 15 2006, 12:28:46 AM »
Quote from: "Recklessrob @ Sat Oct 14, 2006 11:26 pm"
Quote from: "SuperSix @ Sat Oct 14, 2006 11:23 pm"
Quote from: "Recklessrob @ Sat Oct 14, 2006 11:01 pm"
I did a test fit with the crank in my block today. Mains are .0015". :supz:
No interference issues whatsoever.

I don't have a TPS tech, but I do have the volt booster.
The volt booster has worked well for me.
Logged
'87 GN, 60lb, TA49, THDP, FTP cam, T+ lots o' shit - SOLD
'07 Ford F150 Lariat 2WD, 5.4L 3v - 255k
'20 Kubota BX2380. FEL, 60" deck
'78 IH/Case 184 Lo-Boy
'99 Kawasaki Bayou 400 4x4

Offline Recklessrob

  • Turbo Street Outlaw
  • *******
  • Posts: 5112
  • PSI: 3
    • View Profile
Re: Ahhh.. It feels good to work on the TR!
« Reply #7 on: October 15 2006, 12:33:02 AM »
I'd have done that too, if the alternator I have now didn't have a lifetime warranty.
Logged
Rob

Offline 87natty

  • Turbo Street Outlaw
  • *******
  • Posts: 3616
  • PSI: 0
    • View Profile
    • http://www.wix.com/lynch455/science
Ahhh.. It feels good to work on the TR!
« Reply #8 on: October 15 2006, 01:44:35 AM »
I'd rather have the kit to maintain original looks. Plus, rebuilding shit is fun.
Logged
My 1958 Mamiya can beat up whatever camera you just wasted your money on.

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Ahhh.. It feels good to work on the TR!
« Reply #9 on: October 15 2006, 09:35:10 AM »
Good job SuperSix.  I have a garage full of parts I need to install.  Just need to get off of my ass and do it!!
Logged
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline SuperSix

  • Administrator
  • Turbo Street Outlaw
  • *******
  • Posts: 5072
  • PSI: 234
    • View Profile
Ahhh.. It feels good to work on the TR!
« Reply #10 on: October 15 2006, 10:09:12 AM »
Quote from: "Top Speed @ Sun Oct 15, 2006 8:35 am"
Good job SuperSix.
Logged
'87 GN, 60lb, TA49, THDP, FTP cam, T+ lots o' shit - SOLD
'07 Ford F150 Lariat 2WD, 5.4L 3v - 255k
'20 Kubota BX2380. FEL, 60" deck
'78 IH/Case 184 Lo-Boy
'99 Kawasaki Bayou 400 4x4
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.7 © 2008-2024, SimplePortal