Author Topic: Spec on Earl's Pistons?  (Read 2689 times)

0 Members and 1 Guest are viewing this topic.

Offline Forzfed

  • Turbo Street Eliminator
  • ******
  • Posts: 1341
  • PSI: 5
  • Boost n00b
    • View Profile
Spec on Earl's Pistons?
« on: June 01 2017, 11:13:33 AM »
Earl, what are the specs on your piston?  Pin height, dome and all that fancy stuff?

Offline TexasT

  • Legend in my own mind
  • Turbo Street Outlaw
  • *******
  • Posts: 2171
  • PSI: 1
  • So, This black car is fast?
    • View Profile
Re: Spec on Earl's Pistons?
« Reply #1 on: June 01 2017, 02:31:52 PM »
I'm pretty sure you can order whatever you want. But I'm sure earl will be along to let us know.
Rich

"Goals without actions are just dreams."

Offline Forzfed

  • Turbo Street Eliminator
  • ******
  • Posts: 1341
  • PSI: 5
  • Boost n00b
    • View Profile
Re: Spec on Earl's Pistons?
« Reply #2 on: June 01 2017, 04:36:56 PM »
I was more interested in the cc's of the dome.  But I found a PM from him where he says he uses a 22 cc dome.

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: Spec on Earl's Pistons?
« Reply #3 on: June 02 2017, 06:35:14 AM »
Yep, 22cc inverted dome.   OD is anywhere between 2.500" and 5.500"  :)

Pin height can be a little tricky depending on the ring pack. 1/16 have a little less room than 1.5's, and a long rod stroker needs oil ring support rails most of the time.
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal