Author Topic: About to get motor back...  (Read 1959 times)

0 Members and 1 Guest are viewing this topic.

Offline bescurred

  • Bone Stock
  • **
  • Posts: 42
  • PSI: 0
  • Boost n00b
    • View Profile
About to get motor back...
« on: May 17 2016, 10:51:54 AM »
Couple of questions


For the harland sharp rockers what bolts have y'all been using?


I went with a roller cam and still have the stock Cam sensor.  Do I need to install the bronze gear? 


Whats the biggest pump I can go with using the stock lines...

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6517
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Re: About to get motor back...
« Reply #1 on: May 17 2016, 11:49:45 AM »
Sounds like the Deatchwerks is one that approaches the limits based on the number of guys that say A: works fine or B: had to drill out the one fitting on the return side to maintain regulation.
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal