My 200 Trans Build Info

[larrym]

Isn't that what they are for Brad?

[Scoobum]

No comment.

[TexasT]

That's why I bought mine. It got raced every chance I got when the trans was working. Which was hit n miss the first 3 or so years. We had a great time. Then I got married and had kids so my time was limited. Now I have it back together and am enjoying just driving it.

[Scoobum]

Update...for anyone that's interested. The new transmission shifts are quicker and firmer...espec ially the 2-3 shift. I'll assume this is due to the billet direct clutch piston and dual feeding high gear. Was gonna get some PL shift data tomorrow at the track...but immediately upon test driving the new trans...the shifter assembly decided to take a dump. Swapping in another one tomorrow. I hate these cars...

[good2win22]

Nothing like a tranny that shifts right

[larrym]

So my tranny was working pretty well my only complaint was the 2-3 shift. I had done the 2-3 control valve mod when I went thru the tranny prior to having it rebuilt by a local pro. (Sheared the band anchor burnt the drum)
He reversed all the mods I had done to the valve body decided to put my CK separator plate back on and mod the 2-3 control valve.
Whoo Hooo what a difference night and day 2-3 is crisp and quick not the slide in I was starting to get at WOT. When I originally did this mod I had a slight bind at low throttle wasn't kicking the band off fast enough not now 😃

[TexasT]

So my tranny was working pretty well my only complaint was the 2-3 shift. I had done the 2-3 control valve mod when I went thru the tranny prior to having it rebuilt by a local pro. (Sheared the band anchor burnt the drum)
He reversed all the mods I had done to the valve body decided to put my CK separator plate back on and mod the 2-3 control valve.
Whoo Hooo what a difference night and day 2-3 is crisp and quick not the slide in I was starting to get at WOT. When I originally did this mod I had a slight bind at low throttle wasn't kicking the band off fast enough not now 😃

What 2nd servo are you using?

[Scoobum]

Larry, I have a question too. What mod was done to the 2-3 control valve? Rich...maybe you could answer this.

[larrym]

You install a 1/4 cup plug in the control valve bore than delete the spring install  the valve. It speeds up the 2-3 shift. I'll see if I can find my diagram it's in the CK shift kit instructions.


Page 9


http://www.ckperformance.com/Files/112573/200R4REVISEDSHIFTKITINSTRUCTIONSMAY192014OFFICE.pdf

[larrym]

Rich I missed your question its the Transgo billet servo.