Author Topic: should I be concerned  (Read 6859 times)

0 Members and 1 Guest are viewing this topic.

Offline larrym

  • Turbo Street Eliminator
  • ******
  • Posts: 1363
  • PSI: 1
    • View Profile
Re: should I be concerned
« Reply #15 on: January 17 2015, 06:59:15 PM »
These are morels I purchased  cam lifters pushrods chain and springs from Webber a couple years ago and installed it in the motor I had in the car. Great guys to deal with IMO.
I have seen some of the issues guys have had with these lifters and the roller shaft. Mine still appear tight and from what I have read the new ones have a snap ring to ensure the shaft stays in place. They not loud but you can hear them mostly inside the car when rolling to a stop.


Bottom line if I did it again I would use the Morels and probably Webber again.
86 white T type with t tops and blackout trim. 60lb injectors Gen 2 with Extender Chip TR6 ignition 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Intercooler Cobbled together Alky Injection 4 inch MAF pipe with integral sensor
2800 stall lots of fun with a little 6 banger!
Best ET 11.36

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal