Author Topic: Caspers Headlight Brightener  (Read 49960 times)

0 Members and 1 Guest are viewing this topic.

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6517
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Re: Caspers Headlight Brightener
« Reply #165 on: March 15 2012, 10:36:16 PM »
I would be inclined to get ceramic sockets if using the high wattage halogens.
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

Offline ULYCYC

  • Turbo Street Modified
  • *****
  • Posts: 872
  • PSI: 4
    • View Profile
Re: Caspers Headlight Brightener
« Reply #166 on: March 16 2012, 08:10:17 AM »
The 100 or 160 watt bulbs are designed for off road rally use. Sitting in traffic will self destruct even with ceramic sockets. I'm talking about low beams.
ED BAKER
87-T, Maplight equipped rear view mirror..
01 Park Ave Ultra S\'charged
BPG#1458

Offline 1KWIKSIX

  • Turbo Street Modified
  • *****
  • Posts: 303
  • PSI: 0
    • View Profile
Re: Caspers Headlight Brightener
« Reply #167 on: March 16 2012, 07:12:49 PM »
Dunno about the 160 watt bulbs, never heard of them before?
 
However back in the late 70's / early 80's I had installed 55 / 100 watt bulbs in my 5 3/4" H4 Cibie headlights and 100 watt bulbs in my 5 3/4" H1' Cibie's....these were marked for off road use only at that time too.....I used them for years on both my Ford Capri and on my BMW 320i as well......you can only imagine what 400watts of hi beam light looks like.....frick in wild!   :icon_eyes:
 
Never had any problems with melt downs......of course all 4 - 100watt bulbs weren't on for prolonged periods of time.....was great for the country back roads we used to race up to the cottage late Friday nights......on ly had to run relays for both the low beam and high beam to make sure the headlight / hi beam switches were safe.

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal