Author Topic: Oil pickup tube  (Read 2652 times)

0 Members and 1 Guest are viewing this topic.

Offline chrisgarrett

  • Bone Stock
  • **
  • Posts: 98
  • PSI: 0
    • View Profile
Oil pickup tube
« on: January 30 2011, 01:53:06 PM »
I'm curious.  I had a hard time taking off my oil pan because it was hung up on the pickup tube.  I've had several engines and never had the problem before.  Anyway, I had to let the pan dangle while I reached in and removed the tube.  I happen to have four pickup tubes which I have collected over the years and when I put them side-by-side, they were different lenghts.  The one that I got hung up on was a good 1/2" shorter than the others. They also have very different looking bottom screen sections.  As far as I know, they are all off of '86 and '87 turbo regals.

Offline ULYCYC

  • Turbo Street Modified
  • *****
  • Posts: 872
  • PSI: 4
    • View Profile
Re: Oil pickup tube
« Reply #1 on: January 30 2011, 04:33:55 PM »
Melling book only shows one for our 86-87 turbo motor. pn# 201-1S2
Different year and models use other pn#'s, they vary by 3/4" in length.
I would throw them all out and get the correct one.
ED BAKER
87-T, Maplight equipped rear view mirror..
01 Park Ave Ultra S\'charged
BPG#1458

Offline Just a Six?

  • OK Now who Farted??
  • Turbo Street Eliminator
  • ******
  • Posts: 1253
  • PSI: 2
    • View Profile
Re: Oil pickup tube
« Reply #2 on: March 05 2011, 11:49:17 AM »
I noticed the aftermarket have a 3/4" wide thin metal strip across the bottom & the GM have the little round flap that opens when its clogged up. I can't really see under that 3/4" wide strip of metal to see what it has for a plan B but now I will see if they are the same length? I know I have 2-3 here at least.
David
87 LTD. Purchased May 88
Doeskin leather, coach lites without Landau Roof, moon roof, carpeted trunk & No Factory Hood Ornament!
The sticker on AC shows a V-8 Carb car. Special order by Mr. Nick Hall VP of GM Canada
Runs 11.50 on 21 lbs with my old style 67 Q Trim & Alchy

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal