Zap *STILL* wears Depends
0 Members and 1 Guest are viewing this topic.
AVAILABLE AGAIN - THE FAN DELAY RELAY SENSOR - We last show this the original GM 1986-1987 Turbo Regal Fan Delay Relay available in limited quantities back in 2007. At that time we were selling them for $75 each. This is the largest of the 3 relays located on the 1986-1987 Turbo Regal inner driver's fender. We recently came across a source that has made them available to us again. Apparently this fan delay relay was used in another application, so this part is now available again. This reproduction is better than the GM original because it has mounted the internals in the top section of the housing so moisture no longer collects on the electronics and cause corrosion and eventually failures. PHOTO 3 - Shows both a used original fan delay relay and a new reproduction with the housing removed. You can clearly see the difference in the location of the electronics and how moisture has ruined the original fan delay relay. Because both fan delay relays are identical in size, if you want to keep your car looking original, you can carefully remove the original housing cover and install it on the new reproduction unit, so the original numbers on the housing look correct. The new reproduction ones do not have any protective grease on the terminals to ward off moisture, so we have included a small packet of dielectric grease with each one. Because of its location on the inner fender, even basic washing your car can cause moisture to seep into the fan delay relay, since it is not a sealed relay.
Thanks guys. A few weeks ago I dug through my cache of parts and found one - all is well now.LOVE the Racetronix harness and dual fans!
I have dual Spals with the Steve Wood harness and it has been running cool for years LOL(with no stupid delay relay)
