Fuse Box Wiring

[gordyzx9r]

Just curious how people are powering their accessories.

I have the following that need power:

SMC Alcohol Control
Scanmaster
Tachometer
Casper's Audible Knock Alarm

I just realized that I have one of them plugged into a battery port and it must be causing a constant drain so I need to change that today.

As far as the IGN ports, is it alright to splice two accessories into one port?

[Recklessrob]

The scanmaster and audible knock just get ign power (very little draw)
As for the SMC kit you'll want to be a little more creative and set up a relay
for your pump. (probably included in the kit w/ directions)

[87natty]

Yup. I have an ANS knock alert and my Scanmaster hooked up to the IGN ports on the fuse box. I wouldn't splice two into one.

[Steve Wood]

all the ign ports share a common fuse so it really does not make any difference.

[gordyzx9r]

The scanmaster and audible knock just get ign power (very little draw)
As for the SMC kit you'll want to be a little more creative and set up a relay
for your pump. (probably included in the kit w/ directions)

I have a first generation (the non-progressive) SMC kit.  It was installed years ago and I don't think there is a relay, I think it's just getting it's power from the fuse box.  IDK for sure, I didn't install it.  

As for the battery ports, if something is wired into a battery port will it cause a constant drain even with the key off?

[Top Speed]

As for the battery ports, if something is wired into a battery port will it cause a constant drain even with the key off?

It should not as long as it does not draw any current while the device is off.