Cobbled together a 2.5 inch downpipe I have a 3” but it sweeps too close to the inner fender. I can modify it but would have to vent the waste gate to atmosphere what’s the opinion would this affect my wide band reading it’s after the waste gate.
It sure is lol. I had to drop my converter off not enough clearance at the flex-plate. Got my tank back had a sump installed also have an AEM 380lph in-line pump on the way it’s coming together.
My buddy Chris set me up with a partial harness removed a couple redundant things got a lead to power the CCCI and the injectors taped it up still have to tie into the C437 at the computer side. I hate wiring....
Thanks Brad I will. I have been doing a little digging and for what it’s worth I think I will keep the stock computer. I thought it was going to be less work to setup the FAST but I still need the engine harness. There are only a few wires on the dash connector C437 the clear one I need to tap into.
Thank you sir. I have download the software already was hoping to find n old manual to read thru. I want to make sure I can make it work before I pull the trigger.
Show Posts
Are you upgrading the turbo?
