IHADAV8.com - Turbo Buick Tech, and Nonsense
Tech Area => General Buick Tech => Topic started by: we4turbobuick on August 15 2013, 02:33:56 PM
-
i was checking my brake system out because my pedal was feeling spongey. so I took out the master cylinder and brake booster. and found out that the brake booster I was broke around the plastic tip where the rod that goes to the brake pedal. when they converted to back in brakes I don't think that they changed the pedal and it broke it because the pedal and booster rod wasnt lined up right. so i need a pedal what cars can i get one from? this is one of the many issues im having!!! :icon_evil:
-
i was checking my brake system out because my pedal was feeling spongey. so I took out the master cylinder and brake booster. and found out that the brake booster I was broke around the plastic tip where the rod that goes to the brake pedal. when they converted to back in brakes I don't think that they changed the pedal and it broke it because the pedal and booster rod wasnt lined up right. so i need a pedal what cars can i get one from? this is one of the many issues im having!!! :icon_evil:
Any RWD GBody, and there's a thread somewhere, I think you can reposition the pin.
-
this is the pedal I took off with the vacuum setup......
-
http://www.ihadav8.com/forum/index.php?topic=4054 (http://www.ihadav8.com/forum/index.php?topic=4054)
-
thanks for the info its getting prepped very soon !!!!!
-
I just got my brake pedal fixed by relocating the pin for the booster. Im haveing problems putting the one nut on the bolt that holds the brake pedal. Its a tight fit in there...... i might have to drop the steering column!! Is there a guide somewhere on the net that can show me how to drop the steering column down so I could make it easier to put the bolt on. Thanks
-
two nuts to remove to drop the column down...
-
two nuts to remove to drop the column down...
You and who else?
:rofl:
-
you're not coming over?
-
Haha..
Wait... :x