IHADAV8.com - Turbo Buick Tech, and Nonsense
Tech Area => General Buick Tech => Topic started by: daveismissing on October 12 2012, 11:38:24 AM
-
Anyone know how much air they moved and total current draw?
-
iirc ~22 - 2300
As far as current it was all over the place, ~18 - 26 amp @ 13.8vdc.
AJ___
-
Enough current to melt the factory harness. Ask me how I know. :x
-
1997/1998 Mark VIII fan supposedly moves 5,000 CFM or more?
-
What is this sorcery you speak of, Dave?
Link?
-
http://www.explorerforum.com/forums/showpost.php?s=5ddfd020a676b6ef761ae25ced5ffba1&p=2051004&postcount=6 (http://www.explorerforum.com/forums/showpost.php?s=5ddfd020a676b6ef761ae25ced5ffba1&p=2051004&postcount=6)
http://www.explorerforum.com/forums/showpost.php?s=5ddfd020a676b6ef761ae25ced5ffba1&p=2051203&postcount=12 (http://www.explorerforum.com/forums/showpost.php?s=5ddfd020a676b6ef761ae25ced5ffba1&p=2051203&postcount=12)
above specifics found in the thread here:
http://www.explorerforum.com/forums/showthread.php?t=227617 (http://www.explorerforum.com/forums/showthread.php?t=227617)
-
The fan for the 2006 HHR 2.4 is very popular in some circles and is rumored to be very strong
Price is right from the Rock
-
All those 'cudas with GM fans
http://www.rockauto.com/catalog/moreinfo.php?pk=1375558 (http://www.rockauto.com/catalog/moreinfo.php?pk=1375558)
-
The fan for the 2006 HHR 2.4 is very popular in some circles and is rumored to be very strong
Price is right from the Rock
Wow.. ~$50 bucks..
-
Reportedly pulls a lot of air
-
Lot's of great fans out there. Just keep in mind the increased current draw with some. You don't want your alt glowing red :icon_eyes:
-
the HHR fan reportedly pulls about 15 amps while running
-
The HHR looks like a good one
-
Cheap too.
http://www.rockauto.com/catalog/raframecatalog.php?carcode=1432558&parttype=2181 (http://www.rockauto.com/catalog/raframecatalog.php?carcode=1432558&parttype=2181)
Connector:
(http://www.dormanproducts.com/images/product/icon/620-951-009.JPG)
Measurements:
(http://i41.tinypic.com/wrhrth.jpg)
Installed on an unknown radiator:
(http://i42.tinypic.com/23joi7o.jpg)
Pics swiped from here:
http://www.460ford.com/forum/showthread.php?t=135721&highlight=HHR (http://www.460ford.com/forum/showthread.php?t=135721&highlight=HHR)
-
Worth remembering:
"I was surprised to find that the face of the blade is flush with the left and right sides of the shroud."
-
One of the good reasons to use a factory fan is that the shroud is usually designed to pull air thru the entire core area covered whereas a lot of the aftermarket fans are no so well designed and they tend to pull mainly thru the area covered by the blades