IHADAV8.com - Turbo Buick Tech, and Nonsense

Tech Area => Transmissions => Topic started by: chrisgarrett on March 19 2011, 05:19:51 PM

Title: Steve Wood: Trans cable adjustment
Post by: chrisgarrett on March 19 2011, 05:19:51 PM

Hi Steve,
Looked around your site and didn't see anything on the trans cable adjustment.  Just took her out after fresh engine install and it's shifting too hard.  Is this covered on your most excellent website?  
Thanks

Title: Steve Wood: Trans cable adjustment
Post by: Wrecked Em on March 19 2011, 05:21:29 PM

Theory of Operation
The T.V. cable used on the 200-4R transmission controls line pressure, shift point, shift feel, part throttle downshifts and detent downshifts. The T.V. cable operates the throttle valve lever and bracket assembly inside the valve body.

The Throttle Valve Lever and Bracket Assembly serve two basic functions:

 

Title: Re: Steve Wood: Trans cable adjustment
Post by: chrisgarrett on March 19 2011, 05:30:12 PM

Hey thanks. ( Now we don't have to wake Steve up.  He gets cranky.)  I have one other request if you don't mind.  Would you consider removing that damn avatar?  It was very difficult to read what you had posted.  My eyes kept shifting left and I would lose my place.

Title: Steve Wood: Trans cable adjustment
Post by: SuperSix on March 19 2011, 07:05:03 PM

Don't listen to him Bryan.

Title: Steve Wood: Trans cable adjustment
Post by: Steve Wood on April 27 2011, 12:13:35 AM

http://www.vortexbuicks-etc.com/tvcable.htm